4/18/19 - We are on vacation. Orders will be processed when we re-open 4/29/19.

  Home > Vibrant >

No-Weld O2 Sensor Mount - 2.5 Inch

No-Weld O2 Sensor Mount - 2.5 Inch

Our Price: $39.99

Availability: Typically Ships Same Day
Product Code: UXNW-30-2355-250

This No-Weld O2 Sensor Mount allows the mounting of an O2 sensor without having to weld a sensor bung onto the exhaust. Simply drill a hole in the exhaust, install the gasket, and bolt the clamp. It's that easy! The 2" mount will fit exhausts from 1.75" to 2" in diameter.

If you need to mount an O2 sensor and don't know how to weld, or can't find someone who can, this is a permanent solution that replaces a welded-in O2 bung. Now simply drilling a hole in the exhaust is all you need to do in order to add a wideband to your car!

Pressure tested to 50 PSI! Works with all standard O2 sensors with M18 x 1.5 thread.

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

©  Integrity Speed LLC. All Rights Reserved.
BoostController.com is owned and operated by Integrity Speed LLC, a New York State Limited Liability Company.
BoostController.com is a trademark and service mark of Integrity Speed LLC.