SAME DAY SHIPPING of in-stock orders plus FREE STANDARD SHIPPING on orders of $100 and over (Click for Details)






  Home > Shop By Brand > Generic (no brand) >

Boost Gauge Tap Fitting Kit - Standard Version
Boost Gauge Tap Fitting Kit Standard


 
Our Price: $5.50

Availability: Typically Ships Same Day
Product Code: GBA-003
Qty:

Description
 
This allows you to tap your mechanical boost gauge into an existing boost / vacuum line in your engine bay. It can be used with any mechanical boost gauge that use 1/8" outside diameter tubing as a feed line, like Auto Meter and others.

This kit does NOT have the Anti-Buzz restrictor in the T-Fitting. If you want that (and if you have a MK4 or earlier VW you probably do), see the Anti-Buzz version of this kit.

This standard version kit includes: a T-Fitting, a rubber "Splicing Tube" which allows you to attach the 1/8 inch outside diameter nylon tube that comes with the mechanical boost / vacuum gauge (like Auto Meter and others) to the T-Fitting, 4 small cable ties, and instructions. After attaching your 1/8 inch OD tube from the gauge to the T-Fitting, just find a good boost / vacuum line (~4 mm) in your engine bay to tap into and "voila".... you're done. Note: This kit is especially good for Auto Meter's "Pressure Only" mechanical gauges like the 0 - 35 PSI gauges because they have only a cumbersome brass fitting to tap your boost. Note that the Auto Meter "Vacuum/Boost" gauges that read both vacuum and boost do come with a "T" from the factory.

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

Shop By Brand > Generic (no brand)
Fabrication > Miscellaneous Fittings > Fitting Kits
©  Integrity Speed LLC. All Rights Reserved.
BoostController.com is owned and operated by Integrity Speed LLC, a New York State Limited Liability Company.
BoostController.com is a trademark and service mark of Integrity Speed LLC.