SAME DAY SHIPPING of in-stock orders plus FREE STANDARD SHIPPING on orders of $100 and over (Click for Details)






  Home > Shop By Brand > Generic (no brand) >

Boost Gauge Tap Fitting Kit - Anti-Buzz Version
Boost Gauge Tap Fitting Kit Anti Buzz


 
Our Price: $7.50

Availability: Typically Ships Same Day
Product Code: GBA-003AB
Qty:

Description
 
This kit allows you to tap your mechanical boost gauge into an existing boost / vacuum line in your engine bay. It can be used with any mechanical boost gauge that use 1/8" outside diameter tubing as a feed line, like Auto Meter and others.

This is the Anti-Buzz version. This kit has a special restrictor orifice built-in to it's T-Fitting which serves to absorb any vibration that the line may be subjected to and help eliminate the BUZZ sound that some users experience emanating from boost gauges. This is a common issue with turbocharged VW set-ups, especially Mk4 versions. (That noise is caused by high frequency air pulses that come out of the turbo.) The kit includes: the T-Fitting with the restrictor orifice, a rubber "Splicing Tube" which allows you to attach the 1/8 inch boost gauge feed tube to the T-Fitting, 4 small cable ties, and instructions. After attaching your 1/8 inch tube from the gauge to the T-Fitting, just find a good boost / vacuum line in your engine bay to tap into and "voila".... you're done.

Note: This kit is especially good for Auto Meter's "Pressure Only" mechanical gauges like the 0 - 35 PSI gauges. They have only a cumbersome brass fitting to tap your boost. The Auto Meter "Vacuum/Boost" gauges that display both vacuum and boost do come with a "T" from the factory but we think the Boost Gauge Installation Fitting Kit is still a good idea for those too, as the "T" included with this kit has the special "restrictor orifice" built-in. Plus, we like the way this kit makes the seal at the "T" compared to the method provided with Auto Meter's vacuum/boost gauges. This kit also works with VDO boost gauges and any other boost gauge that utilizes a 1/8 inch OD feed line (most do - but not Turbosmart for example). There is also a Standard version of this kit when the restrictor orifice that eliminates the buzz is either not wanted or is unnecessary.

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

Shop By Brand > Generic (no brand)
Fabrication > Miscellaneous Fittings > Fitting Kits
©  Integrity Speed LLC. All Rights Reserved.
BoostController.com is owned and operated by Integrity Speed LLC, a New York State Limited Liability Company.
BoostController.com is a trademark and service mark of Integrity Speed LLC.